Wireless Access, Switching, Optical Access and Cabling
Wireless access & coverage:
APs, AC gateways, bridges and 5G routers
Indoor ceiling and wall-plate units, outdoor and lift coverage, inter-building backbones, and 4G/5G backup where there is no fixed line. What separates the options is not the Wi-Fi generation but density, interference and how the link is backhauled.
APCeiling & wall-plate APs
From the Wi-Fi 6 dual-band 3000 Mbps AI6220 and the AIH-622 in-wall unit, to the Wi-Fi 7 tri-band PH19000 / PH11000, the all-optical ceiling PH3600 and the PH3000P wall plate — covering high-density offices and hotel rooms.
ACWireless controllers / AC gateways
The AC1600 / AC2600 controllers and the PH5000 10G commercial gateway (manages 512 APs, with built-in firewall and traffic shaping) — one SSID, one roaming policy, one admission rule set.
BRIDGEWireless bridges
20 km industrial dual-band 10G Wi-Fi 7 backbone bridges, 30 km commercial, 16 km 6 GHz and 0.5 km lift-specific units. For links across buildings, campuses, rivers and lift shafts where fiber cannot reach.
CELLULAR4G / 5G mobile routers
Wi-Fi 7 / Wi-Fi 6 5G mesh routers (PH6000 / PH3000, NSA/SA dual-mode, all carriers), 4G industrial routers and a 300M outdoor model. For temporary offices, exhibitions, construction sites and fixed-line failover.
Switching & data center:
Access PoE, aggregation and AI data-center switches
At access it is PoE budget and port shape; at aggregation, stacking and uplink bandwidth; in the data center, port density and clock synchronisation. The three layers should not be bought from one checklist.
ACCESSAccess-layer PoE switches
8+1 port 2.5G PoE with 10G uplink, 4+2 port all-gigabit, and 8-port unmanaged gigabit. Sized against the real power budget of cameras and APs, not by counting ports.
SECURITY POESecurity-dedicated PoE
8+2+1 port all-gigabit unmanaged PoE (8GE PoE + 2GE uplink + 1 SFP), with AI PoE watchdog and port self-healing; CCTV projects choose the model by camera density.
MANAGEDManagement & aggregation
16+2 fiber L2 managed PoE with VLAN, link aggregation, loop protection and central management. It joins the management system already in place, so it is administered alongside the equipment on your network.
DCAI data-center switches
PH2500S (800G, Tomahawk 5) and PH2601S (1.6T, Tomahawk 6): high-density OSFP, port breakout, line-rate L2/L3, built for leaf-spine and super-spine, with PTP and SyncE.
Optical access & transport:
OLT, ONU, OTN and MSAN access platforms
Campuses, hotels, hospitals and schools share one problem: too many floor switches, no power in the weak-current room, copper that will not reach. PON pushes the access point into the room over a single fiber, with no active equipment in between.
OLT10G PON / GPON OLT
PH3500-S chassis (PH3500-01T / 01S) and PH3100 pizza-box: one platform takes GPON, XG-PON and XGS-PON in mixed slots, so it scales with subscriber count.
ONUONU series
The full ONU range: SFU, HGU, MDU and FTTR ONU sticks. HGU for homes and guest rooms, MDU for dormitories and multi-room units, FTTR for the second fiber hop inside a room.
OTNAccess OTN
PH6800-C1 / C2 / U5 with OTU1/OTU2 on the line side and 100M–10G Ethernet plus STM-1/4 SDH on the client side, GCC remote management included; used for high-bandwidth inter-campus links.
MSANMSAN & hybrid power-fiber
The PH1205 integrated access platform carries copper voice and broadband; the hybrid power-fiber scheme feeds power from the splitter end, solving remote ONU power in one step and reaching roughly five times the distance of PoE.
Optical communications & cabling:
Optical modules, AOC/DAC, MPO and LC patch cords
Modules and patch cords are the easiest things to buy carelessly, and the most common source of failure. We turn rate, form factor, reach and fiber type into one selection table, and ship test results with loss labels on every batch.
TRANSCEIVEROptical modules
SFP / SFP+ / SFP28 / QSFP+ / QSFP28 / QSFP-DD covering 1G, 10G, 25G, 40G, 100G and 200G; single-mode, multimode, copper and BiDi single-fiber bidirectional.
CABLEAOC & DAC
Active optical cables for 3–100 m between racks; DAC copper for short runs inside a rack. Chosen by switch port and rack layout, not by price.
MPOMPO multi-fiber
8, 12 or 24 fiber, Elite low-loss (≤0.35 dB), 800–1000 mating cycles, −40 to 75 °C, Type B polarity; standard for 40G/100G parallel runs.
LCLC patch cords
OS2 single-mode (yellow), OM3 (aqua), OM4 (violet), with UPC or APC end faces; length and jacket built to the tray and rack route on site.
Not sure where to start? Enter by scenario
AP density follows floor area, ceiling height, headcount and concurrency; the number of drop points then decides between standalone APs and a controller.
Get a coverage estimate →Line of sight, distance and bandwidth decide between a bridge and fiber; beyond 10 km it is long-range bridges or cable.
Get a link design →Modules and patch cords matched to port speed and reach; bulk projects can include test reports.
Get a selection list →