Opened the wrong way — this page has no styling and no images.
Image and stylesheet paths are resolved from the site root (/assets/…), so opening the file directly resolves them to C:\assets\… and nothing loads.
To see it properly: unzip 2_双击进后台改字_仅Windows.zip and double-click 启动后台.bat — the browser then shows the full site with styling, images and the ZH/EN switch.
(This zip is a plain static preview: opened directly it shows one page at a time, without styles, images or the language switch.)
Once uploaded it works normally: live traffic arrives over http, not by double-clicking a file.
This notice only appears when the file is opened locally; online visitors never see it.
← Back to product family
Optical communications & cabling
MPO multi-fiber trunk patch cords
8 / 12 / 24 fiber
The standard for 40G/100G parallel links: Elite low loss (≤0.35 dB), 800–1,000 mating cycles, −40 to 75 °C, Type B polarity.
800–1,000 cycles
Mating cycles
−40~75℃
Operating temperature
Where it fits: why multi-fiber
40G/100G modules transmit over 8 or 12 fibers in parallel. One MPO connector mates the whole group — less space and fewer failure points than 12 LC cords.
MPO runs the trunk and an MPO-to-LC breakout splits it into single lanes, so a room change never disturbs the trunk.
How to choose and install: polarity matters
Type B (crossed) is the standard for 40G/100G parallel optics: pin numbering is reversed end to end.
Specify fiber count, polarity, male/female and length when ordering — get any one wrong and the link will not come up.
Specifications
| Fiber count | 8 / 12 / 24 fiber |
| Loss grade | Elite (≤0.35 dB) / standard (≤0.75 dB) |
| Mating cycles | 800–1,000 cycles |
| Operating temperature | −40~75℃ |
| Polarity | Type B (the 40G/100G parallel standard) |
| Polish | APC / UPC available |
| Customization | Made to the rack and tray route, with a loss test label |