Opened the wrong way — this page has no styling and no images.
Image and stylesheet paths are resolved from the site root (/assets/…), so opening the file directly resolves them to C:\assets\… and nothing loads.
To see it properly: unzip 2_双击进后台改字_仅Windows.zip and double-click 启动后台.bat — the browser then shows the full site with styling, images and the ZH/EN switch.
(This zip is a plain static preview: opened directly it shows one page at a time, without styles, images or the language switch.)
Once uploaded it works normally: live traffic arrives over http, not by double-clicking a file.
This notice only appears when the file is opened locally; online visitors never see it.
ProductsWireless access & coverageSwitching & data centerOptical access & transportOptics & cabling
ServicesManaged NOCImplementation & deliverySpare parts & maintenanceAdvisory & architecture
SolutionsManaged network operations & NOCCampus & wireless coverageCloud-network branchesSecurity & compliance
Case studiesScale · managed operationsSpeed · bulk migrationContinuity · legacy retrofitTechnical notes
About usCompany profileCertificationsOffices & contactTechnical notes
Resources & contactTechnical notesFAQDelivery processPricingPrivacy & termsContact usOffice address
← Back to product family
Wireless access & coverage

Ceiling & wall-plate APs

3 uplink types · 10 rate tiers

Indoor access points, ceiling- or wall-mounted, with copper or fiber uplink. System rates run from 0.3 to 18.7 Gbps, powered to 802.3af, 802.3at or 802.3bt; fiber models take remote power over hybrid cable.

Ceiling access point
3types
Ceiling / wall plate / fiber
18.7Gbps
Top system rate
10tiers
Rate tiers
802.3bt
Top power standard

Three form factors, chosen by mounting point

Ceiling On a suspended or solid ceiling, one unit covers an open area: offices, meeting rooms, classrooms, hotel public areas.

Wall plate Replaces the network socket in a standard 86 box, one per room. It stands 8.5–10.8 mm off the wall and fits the existing back box: guest rooms, dormitories, single offices.

Fiber uplink Fiber upstream with hybrid power-fiber or PoF remote power — for fiber to the room, passive splitting, and buildings where mains work is restricted.

Four parameters decide the model

System rate 0.3 / 1.2 / 1.8 / 3.0 / 3.6 / 5.0 / 7.8 / 9.8 / 12.9 / 18.7 Gbps — ten tiers. Size it on concurrent clients, not on floor area.

Uplink Gigabit copper → 2.5G copper → 10G SFP+ → GPON / XGS-PON. When uplink bandwidth drops below a third of the radio rate, concurrent clients queue on one link.

Power 802.3af 15.4 W, 802.3at 30 W, 802.3bt 60–90 W, rising with the rate tier. Fiber models take power over hybrid cable, so the 100 m PoE limit does not apply.

Mounting Ceiling, 86 box in the wall, or the wiring closet. For wall plates, measure the back-box depth first, then the protrusion.

Model comparison

Three groups, sorted by system rate within each. One lead model is listed per tier; other models in the same tier differ by port count and enclosure. A dash means the datasheet does not state it.

Ceiling · copper or fiber uplink

ModelWireless standardSystem rateUplinkPowerClients
PH19000Wi-Fi 7 tri-band18.7 Gbps1×10G SFP+
1×10G WAN
802.3bt / DC 54V1536
PH13000Wi-Fi 7 tri-band12.9 Gbps1×10G SFP+
1×10G WAN
802.3bt / DC 54V1536
PH880-5460Wi-Fi 7 dual-band9.8 Gbps1×10G SFP+
1×10G WAN
802.3bt / DC 54V768
PH980Wi-Fi 6 tri-band7.8 Gbps1×2.5G WAN802.3bt / DC 12V—
PH750Wi-Fi 7 dual-band5.0 Gbps1×2.5G WAN802.3at / DC 12V256
PH880Wi-Fi 6 dual-band3.6 Gbps1×2.5G WAN
1×2.5G LAN
802.3at / DC 12V256
PH830-P3Wi-Fi 6 dual-band3.0 Gbps1× gigabit WAN802.3at / DC 12V—
PH6220Wi-Fi 6 dual-band3.0 Gbps1× gigabit WAN802.3at120
PH820Wi-Fi 6 dual-band1.8 Gbps1× gigabit WAN802.3at / DC 12V128

Wall plate · 86 box

ModelWireless standardSystem rateUplinkPowerClients
PH850Wi-Fi 7 dual-band5.0 Gbps1×2.5G WAN802.3at128
PH836Wi-Fi 7 dual-band3.6 Gbps1×2.5G WAN802.3af128
PH655Wi-Fi 6 dual-band3.0 Gbps1× gigabit WAN
4× gigabit LAN
802.3af / DC 12V128
PH818Wi-Fi 6 dual-band3.0 Gbps1× gigabit WAN802.3af128
PH812Wi-Fi 6 dual-band1.2 Gbps1× gigabit WAN802.3af128
PH6602.4G single-band0.3 Gbps1× 100M WAN802.3af32

Fiber uplink · PON and PoF

ModelWireless standardSystem rateUplinkPowerClients
PH624-XWi-Fi 6 dual-band5.4 Gbps1×XGS-PON
SC/UPC
Hybrid power-fiber / DC256
PH614-GWi-Fi 6 dual-band3.0 Gbps1×GPON
SC/UPC
Hybrid power-fiber / DC256
PH605H-G
wall plate
Wi-Fi 6 dual-band3.0 Gbps1×GPON
SC/UPC
Hybrid power-fiber / DC256
PH834-PoFWi-Fi 6 dual-band3.0 Gbps2.5G PoF inputPoF 48V128

Need a datasheet or a demo unit? Tell us about the site.

Request datasheet →