Opened the wrong way — this page has no styling and no images.
Image and stylesheet paths are resolved from the site root (/assets/…), so opening the file directly resolves them to C:\assets\… and nothing loads.
To see it properly: unzip 2_双击进后台改字_仅Windows.zip and double-click 启动后台.bat — the browser then shows the full site with styling, images and the ZH/EN switch.
(This zip is a plain static preview: opened directly it shows one page at a time, without styles, images or the language switch.)
Once uploaded it works normally: live traffic arrives over http, not by double-clicking a file.
This notice only appears when the file is opened locally; online visitors never see it.
ProductsWireless access & coverageSwitching & data centerOptical access & transportOptics & cabling
ServicesManaged NOCImplementation & deliverySpare parts & maintenanceAdvisory & architecture
SolutionsManaged network operations & NOCCampus & wireless coverageCloud-network branchesSecurity & compliance
Case studiesScale · managed operationsSpeed · bulk migrationContinuity · legacy retrofitTechnical notes
About usCompany profileCertificationsOffices & contactTechnical notes
Resources & contactTechnical notesFAQDelivery processPricingPrivacy & termsContact usOffice address
← Back to product family
Switching & data center

8-port 2.5G PoE access switch

PH-8081-08H1XS-SC

Eight 2.5G PoE copper ports plus a 10G SFP+ uplink, up to 90 W per port (802.3bt) — sized for Wi-Fi 6/7 APs and high-power cameras.

8-port 2.5G PoE access switch PH-8081-08H1XS-SC
8-port 2.5G
PoE copper ports
90W
Max power per port
10G SFP+
Uplink ports
60Gbps
Backplane bandwidth

Where it fits: why 2.5G

Wi-Fi 6/7 radios already exceed gigabit; leaving the AP on a gigabit uplink throttles them. 2.5G copper is the balanced match today.

90 W per port of 802.3bt powers high-power APs or pan-tilt cameras directly, with no separate mains run.

Why this one: switching capacity

Store-and-forward, 44.64 Mpps forwarding, 60 Gbps backplane; a 4K MAC table with automatic learning and aging.

A DIP switch gives three modes: standard switching / reset / VLAN isolation — ports cannot talk to each other, which suits CCTV and guest networks.

Specifications

ModelPH-8081-08H1XS-SC
StandardIEEE802.3 / 802.3u / 802.3ab / 802.3bz(2.5G)/ 802.3az
Fixed ports8× 10/100/1000/2500M RJ45 (48 V PoE, 802.3af/at/bt, 90 W max per port); 1× 10G SFP+
PoE pinout1/2/7/8- 3/4/5/6+
Switching modeStore-and-forward
Forwarding rate44.64 Mpps
Backplane bandwidth60 Gbps
MAC table4K entries, automatic learning and aging
DIP switchStandard / reset / VLAN isolation

Need a datasheet or a quote? Tell us how you will use it.

Request datasheet →