Optical modules, cables and cabling: 1G to 200G
The physical layer of data centers and campus backbones: optical modules, AOC, DAC, MPO and LC patch cords from 1G to 200G. We match rate, wavelength, reach and connector item by item, so nothing is paired wrong.


Optical modules 1G – 200G
Matched on three things: rate, wavelength and reach. At the same rate, short runs use multimode (850 nm) and long runs single-mode (1310 nm / 1550 nm); the two never mix.
| Rate | Package | Typical wavelength / reach | Fiber and connector | Typical use |
|---|---|---|---|---|
| 1G | SFP | 850nm / 550m;1310nm / 10km | Multimode / single-mode · LC | Access switch uplinks, CCTV backhaul |
| 10G | SFP+ | 850nm / 300m;1310nm / 10km、40km | Multimode / single-mode · LC | Floor to core, server access |
| 10G (copper) | SFP+ RJ45 | Cat6a / 30m | RJ45 copper | Short copper runs, replacing copper-port switches |
| 25G | SFP28 | 850nm / 100m;1310nm / 10km | Multimode / single-mode · LC | 25G server access, leaf-spine |
| 40G | QSFP+ | 850nm / 150m(SR4);1310nm / 10km(LR4) | MPO or LC | Aggregation layer, storage networks |
| 100G | QSFP28 | 850nm / 100m(SR4);1310nm / 10km(LR4) | MPO or LC | Core interconnect, data center spine |
| 200G | QSFP-DD / QSFP56 | 850nm / 100m(OM4) | MPO-16 / MPO-24 | AI training clusters, high-density core |
AOC active optical / DAC direct-attach copper
Inside a rack, 1–5 m is DAC (cheaper, lower latency); between racks or beyond 5 m, AOC (lighter, longer). Neither needs separate optics.
| Type | Rate | Key specifications |
|---|---|---|
| 10G SFP+ DAC | 10.3125 Gbps | Single-lane NRZ, BER < 1E-15, 0–70 °C, 3.3 V, LSZH jacket, SFF-8636 / I2C management |
| 25G SFP28 DAC | 25.78125 Gbps | Single-lane 25G NRZ, BER < 1E-15, 0–70 °C, SFP28 MSA compliant |
| 100G QSFP28 DAC | 103.125 Gbps | 4 × 25G NRZ, BER < 1E-15, QSFP28 MSA and SFF-8636 compliant |
| 200G QSFP-DD / QSFP56 DAC | 200 Gbps | 8-lane or 4-lane, hot-swappable, 0–70 °C |
| 200G QSFP28-DD AOC | 206.25 Gbps | 8-lane full duplex, 850 nm VCSEL + PIN, integrated CDR; OM3 70 m / OM4 100 m; under 4 W per end |
| 200G DD → 2×100G AOC | 200 → 100 Gbps | Breakout (one 200G end, two 100G ends) for high-density port splitting |
MPO multi-fiber patch cords
The workhorse for short 40G / 100G links. Fiber count, polarity and fiber type must all line up — get one wrong and the link stays down.
| Item | Specification |
|---|---|
| Connector | MPO / UPC / female (F); male to order |
| Fiber count | 8 and 12 fiber (standard); 24 fiber to order |
| Fiber type | OM3 / OM4 multimode; single-mode (SM) |
| Loss grade | Elite Loss, insertion loss ≤ 0.35 dB |
| Interchangeability / repeatability | ≤ 0.2 dB / ≤ 0.2 dB |
| Mating cycles | 800–1,000 cycles |
| Operating temperature | −40 ~ 75 ℃ |
| Polarity | Type B (straight); Type A / Type C to order |
| Factory test | Insertion and return loss measured on every cord, with an IL/RL label |
LC single-mode / multimode patch cords
Color follows the fiber type; polish follows the port. The color is not decoration — on site it is the main cue for telling fiber types apart.
| Type | Jacket color | Notes |
|---|---|---|
| OS2 single-mode | Yellow | 9/125 μm, long reach (over 10 km), with 1310 / 1550 nm modules |
| OM3 multimode | Aqua | 50/125 μm, 850 nm VCSEL, 300 m at 10G |
| OM4 multimode | Violet or aqua | 50/125 μm, higher bandwidth: 400 m at 10G, 150 m at 100G |
| Length | — | 1/2/3/5/10 m standard; made to site length |
| Polish | — | UPC (blue) standard; APC (green) for PON and long single-mode runs |
How to choose: the matching method
Start with the ports at both ends
SFP+ or QSFP28, LC or MPO — that decides package and connector. Get this step wrong and everything after it is wrong.
Then the reach and the fiber already there
Whether the existing fiber is single-mode or multimode sets the wavelength; distance decides SR (short reach) or LR (long reach). If the fiber stays, the module has to follow it.
Then check compatibility
Some switches lock modules to a specific coding. We issue a compatibility list for your model and, where needed, supply pre-coded units.
Delivery and testing
Batch consistency
One batch, one batch number, so mixing lots does not make links unstable. Large projects can be stocked under a project number.
Tested cord by cord
Every MPO and patch cord is measured for insertion and return loss, with the label on the part; modules are sampled or fully tested by batch, and the reports ship with the goods.
Packing and labeling
Bagged and labeled by rack or floor, so each part says where it goes and the crew does not re-sort on site.
Spares and replenishment
Common rates and lengths are held in stock; urgent replenishment ships same day or next, so one patch cord never stops the job.
A model list, or a quote first?
Send the equipment model, link distance and quantity and we return a compatibility list and a quote — or a full datasheet first for you to check.
Request the datasheet and a quote →